My 1976 Australian Moke.

[Martin108]

Managed to get some time in the garage over the holidays and fitted all the front end bits. Lots of fitting, drilling, refitting. The new parcel shelves worked out really well. I’m not happy with the pedal box so I will be replacing that in the new year. The steering wheel feels very big compared to the small wheel it originally came with. I will now be able to fit the heater below the dash.

E7D22503-11E6-4388-8C14-E215C3ADD592.jpeg

4E032C80-FF73-42D2-AF4C-69F0465CDA6E.jpeg

6016AC50-19ED-4784-8614-3D3CBAF7DBCE.jpeg

EFEB6FA7-8322-4CA2-952F-19FC89C8DF7B.jpeg

063A67CE-B599-4DE9-8599-D6E297B79310.jpeg

9510B7CC-2343-4910-8F59-E9C7758C0C46.jpeg

[Martin108]

Where would I get a heater bracket like this?

DAE6D6FE-67A7-4AAB-AC45-D0C952580F29.jpeg

E7037644-8E3B-4B92-B77A-0B4A33C17B6E.jpeg

8C0DA78C-7B5D-4837-8D68-249BB127EB0D.jpeg

[Martin108]

Heater pipe access hole through the parcel shelf.

2D8F33ED-CE5F-455B-BB30-A86EE1502992.jpeg

5CC600D3-83DF-45F4-97E6-3365A1EEF602.jpeg

E73E8CD3-8701-4C7E-94D9-1598C482B8ED.jpeg

702FA58B-886A-49C7-8142-953F2D8A62D7.jpeg

3796549D-7DBA-4637-81F4-970A5FF98C80.jpeg

8045DCCB-6C85-4A59-BFB9-C9D4128A53C6.jpeg

[Martin108]

Making a start on the rear suspension.

87B58E6C-E456-4A8F-8FCA-12A7CCA7F380.jpeg

[Halfpint]

Making some good progress. All the components look great.
Did you find the heater bracket?
HP

[Martin108]

Thanks Halfpint, it’s been slow going as I’ve been laid up for a while as I had an operation on my knee. Starting back at it again. Yes I have located a bracket. The new bits are very easy to work with and I hope to make good progress over the next month or so.

[Halfpint]

Hope your recovering well, projects must take a back seat.
HP