another Aussie onboard

[mavro]

Hi Moke lovers,
I thought I would register my self on the forum.
The name is Mavro, and I'm a moke lover thru and thru.
I have a 1975 aussie moke in pieces on it's side of my garage.
she is getting a full restoration, not that it had much rust, as she only had 27000km on her.
bought it off the first owner last year, she only drove it to work every now and then.
I trying to make her a bit special, as I am widening the side boxes and guards by 45mm per side.
I all so run a small Facebook page dedicated to mokes called " Mokes Australia "
you are more than welcome to join...and help spread the moke love.
I hope we can have some good moke chats..

cheers

Mavro

[spider]

Hey Mavro!

Welcome aboard and nice to see you here

Looking forward to seeing some pictures.

Cheers brother

[Nigel(no top)Sykes]

Hello and welcome from the right side oop

[4XMOKE]

Hi Mav, welcome.....
In which corner of your continent are you? And don't say the same place as Spider as we all know that what goes up must come down!

Give us some suggestion as to quite why your sides are to be 45mm wider, is it to accommodate middle age spread?

Best regards
Roger G

[Doug G]

Welcome to the forum.

As you rebuild take plenty of pictures. You won't regret it.

Please post some of them here, even some of the Mini Moke in the current condition.

Good luck with the reconstruction.

Please tell us why you intend to widen the side boxes and guards on the Mini Moke by 45 mm on each side?

[Weske]

Welcome on the forum !! Welcome Aussie We want to see photos because we don't have Facebook

[mavro]

Hi Guys
thanks for the warm welcome
I will post plenty of photos when I get back into it.
its been on hold for a while as I'm busy with other things around the house.


mavro

ps, as I am new I didn't know I wasn't aloud to repost a few photo's on Facebook.
I have pulled them off the page, sorry !

[mavro]

Doug
I am widening the side boxes and guards as I have 15 inch wheels going underneath her.
and they stick out of the guard by 50mm. so to keep the moke looking original, I'm widening the hole moke.
it's a lot of work, just for a set of wheels, but it keeps me busy and I'm making it my own.
when it's done, you wont even see it, unless you put a standard moke next to it.
like me, gotta be different

mavro

[Doug G]

You are going to have a ways to go to beat MEANE

[melbournerob]

Hello Mav! We find you here, we find you there, we find you everywhere!

Best regards (as always!)

Rob

[mavro]

Robby
as a big moke lover, I like to get around....How are you buddy.
I see your moke is still looking good

mav.