Cagiva Oil gauge pressure sensor

Post Reply
Tony Trans Am
Posts: 1
Joined: Thu Jul 09, 2020 13:02

Cagiva Oil gauge pressure sensor

Post by Tony Trans Am » Thu Jul 09, 2020 13:08

I Have a 1991 Cagiva Moke and the oil pressure sender to the gauge (not the light) has packed up. Is this sender common to another car as I'm have problems going down the Moke route to find one.

Nigel(no top)Sykes
MMC Member
Posts: 4861
Joined: Tue Mar 07, 2006 21:04
Location: In t’ north

Re: Cagiva Oil gauge pressure sensor

Post by Nigel(no top)Sykes » Thu Jul 09, 2020 17:22

Usually the oil pressure is a tube from the engine to the dial that connects via a T piece on the engine block
At least can add up

User avatar
MMC Member
Posts: 989
Joined: Fri Dec 31, 2010 15:55
Location: Kenilworth. UK

Re: Cagiva Oil gauge pressure sensor

Post by grantourer » Thu Jul 09, 2020 21:35

Hi, as Nigel says. Should be a capillary tube to the gauge, like this one:- ... lmatim006/

However if some one has changed the gauge you could have one of these:- ... al-244425/

I only used TIM as an example, as they came up first on a Google search. As the say in radio and tv, other versions are avaiable.
Regards, Graham & Judith
1981 Aussie Moke
1989 Portuguese Moke
1992 VW T3 Multivan LLE No 2113

Posts: 5
Joined: Mon Feb 17, 2020 15:27

Re: Cagiva Oil gauge pressure sensor

Post by Mokeytone » Sun Jul 12, 2020 14:07

I have a 1992 Cagiva when the oil pressure sender unit went I bought one from Mini Sport Smiths SMIPT1810-1-10 worked for another 10 years or so but stopped working again last year.

Post Reply

Return to “Engine/Transmission/Clutch”