Rear subframe mounts
-
- Posts: 59
- Joined: Tue Aug 02, 2011 22:36
- Location: North Ayrshire Scotland
Rear subframe mounts
Howdy 68 Morris Moke the rear subframe mounts to body there are two larger mounts on the base of the Mount do they fit to the rear cross member or to the heel board TA
Been that long in bits I have forgotten or it could be my age [emoji32]
Sent from my F8331 using Tapatalk
Been that long in bits I have forgotten or it could be my age [emoji32]
Sent from my F8331 using Tapatalk
"slanj-a-va"
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
-
- Posts: 59
- Joined: Tue Aug 02, 2011 22:36
- Location: North Ayrshire Scotland
Re: Rear subframe mounts
Though that myself but just wanted to confirm. Thanks for the reply
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
"slanj-a-va"
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
-
- Posts: 104
- Joined: Sun Nov 24, 2013 0:40
Re: Rear subframe mounts
Hi , rear subframe front bolts to the fixed tapped plates within the the rear compartments on both sides, the subframe rear mounts are on the crossmember that runs under the rear floor pan . So 4 bolts only at front and four nuts and bolts at rear..
Hope this helps ...JB
Hope this helps ...JB
-
- Posts: 59
- Joined: Tue Aug 02, 2011 22:36
- Location: North Ayrshire Scotland
Re: Rear subframe mounts
This is the part is wider on the base than a standard mini
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
"slanj-a-va"
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
- Halfpint
- Posts: 68
- Joined: Wed Jul 09, 2014 6:24
- Location: North East Victoria. Australia
Re: Rear subframe mounts
Hi,
There are usually shims under the 2 front mounts as well to align the subframe.
Not sure how to check it though.
Halfpint.
There are usually shims under the 2 front mounts as well to align the subframe.
Not sure how to check it though.
Halfpint.
-
- Posts: 59
- Joined: Tue Aug 02, 2011 22:36
- Location: North Ayrshire Scotland
Re: Rear subframe mounts
Car had its original rear subframe, no shims just can't remember if the is for heel board or crossmember at rear sure it was at crossmember
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
"slanj-a-va"
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
- Halfpint
- Posts: 68
- Joined: Wed Jul 09, 2014 6:24
- Location: North East Victoria. Australia
Re: Rear subframe mounts
My Mokes are later models. Just went for a look and both the front and rear mounts are narrower at the base than the one you have posted, so, sorry cant say where it normally fits
HP
HP
-
- Posts: 59
- Joined: Tue Aug 02, 2011 22:36
- Location: North Ayrshire Scotland
Re: Rear subframe mounts
Cheers for having a look appreciated
Sent from my F8331 using Tapatalk
Sent from my F8331 using Tapatalk
"slanj-a-va"
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
1968 SnowberryWhite Morris Moke - 1963 Austin Mini -1978 Leyland Cars 1275GT
1978 Leyland Cars Clubman Estate - 1982 Domino Pimlico Premier
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Rear subframe mounts
There are various shapes of the rear mounting blocks. Some using two long bolts, some using one long one short . I've seen alloy ones and steel ones too. Whatever style you have they are all pretty much the same mounting ( the rear crossmember)
Come on summer
- Halfpint
- Posts: 68
- Joined: Wed Jul 09, 2014 6:24
- Location: North East Victoria. Australia
Re: Rear subframe mounts
I tend to agree.Nigel(no top)Sykes wrote:There are various shapes of the rear mounting blocks. Some using two long bolts, some using one long one short . I've seen alloy ones and steel ones too. Whatever style you have they are all pretty much the same mounting ( the rear crossmember)
I just mowed the lawn and had a look at our '66 MOKE (Project for later ) and there are two different types. The ones at the very back of the MOKE are the same as pictured earlier, however, the front pair are tapered towards the long bolt hole.
Brum took this pic during his build thread and is the closest I can find.
HP