Seat runners for English Moke seat
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Thanks Dean,
Do you know if anyone is making new seat base foams for them? They're getting a bit 'boney'. Also, having looked at standard Mini seat runners, they wouldn't fit in a Moke. Does anyone make or sell a seat runner or subframe kit that I could fit between my lowered English seat and the cross member?
Do you know if anyone is making new seat base foams for them? They're getting a bit 'boney'. Also, having looked at standard Mini seat runners, they wouldn't fit in a Moke. Does anyone make or sell a seat runner or subframe kit that I could fit between my lowered English seat and the cross member?
Get a life, Get a Moke...
JanZ
JanZ
- Dean
- MMC Member
- Posts: 1801
- Joined: Tue Oct 12, 2004 10:28
- Location: Jimboomba, QLD, Australia.
- Contact:
Re: Seat runners for English Moke seat
You can buy the rubber diaphragms from Newton Commercial http://www.newtoncomm.co.uk/products/27 ... ucts-2779/ but I don't think you can get the formed foam anywhere. You can just stuff it with a modern equivalent and it should be OK (did this myself some years ago).janz wrote:Thanks Dean,
Do you know if anyone is making new seat base foams for them? They're getting a bit 'boney'. Also, having looked at standard Mini seat runners, they wouldn't fit in a Moke. Does anyone make or sell a seat runner or subframe kit that I could fit between my lowered English seat and the cross member?
Can't advise on runners though.
Dean
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Seat runners for English Moke seat
How much adjustment do you get with those type of seats ?
Come on summer
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Well, both Rose-Marie and I drive the Aussie comfortably. She's 5'3" and I'm 6'3" . I would say there is some 6" or more of lateral movement. I drove all the way to Arkholme from Wantage - 11 hours and survived. I couldn't do that in the 64 Moke (at the moment). Even R-M said, once seated in the 64 that she found the leg room tight. Plan is to get the same amount of travel as the Aussie Moke, keeping the seat quite low - perhaps an inch higher than it is in the lowered state allowing for runners.
Get a life, Get a Moke...
JanZ
JanZ
-
- Posts: 287
- Joined: Wed Apr 04, 2007 16:14
Re: Seat runners for English Moke seat
How do you get 6" lateral movement for your seats? They must be extremely narrow or has your main body tub been widened? Try remounting the sliders lengthways instead of across the seats
I think 6" fore and aft movement may be more useful
****************
Hi Janz,
don't take me too seriously - nobody else does. Good to hear you've got a new toy: when are we going to see some pictures? Better still, will you be bringing it to Hatton at Easter?
Cheers
PJ
I think 6" fore and aft movement may be more useful
****************
Hi Janz,
don't take me too seriously - nobody else does. Good to hear you've got a new toy: when are we going to see some pictures? Better still, will you be bringing it to Hatton at Easter?
Cheers
PJ
You don't give up Moking when you get old ...... you get old when you give up Moking!
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Hey, don't forget... I are a Engineer and a forinner No offence taken PJ, it was probably Mr Bunnahbhain speaking. Anyway, lateral is a point of view. I was looking at the side of the car when I dreamt that beauty up . Actually looking down the posts... it was only last night, so it was all my own doing and not as a result of Islay malt assistance I do sometimes feel the tub could be a bit wider. How about reshaping a scallop into the paniers to accomodate gluti maximi
Yes... new toy was unplanned and unexpected... but very welcome Don't know how I'm going to fund this yet... but hey, as the Grass Roots sang in 67 - 'Let's live for today'!
Pictures are in my user gallery - here is an example
or look at runamoke site. It's on several pages.
Hatton weekend at Easter... not sure as we usually have family over and it may not go down well if we disappear If we do make it it will be for 1 or 2 days
Yes... new toy was unplanned and unexpected... but very welcome Don't know how I'm going to fund this yet... but hey, as the Grass Roots sang in 67 - 'Let's live for today'!
Pictures are in my user gallery - here is an example
or look at runamoke site. It's on several pages.
Hatton weekend at Easter... not sure as we usually have family over and it may not go down well if we disappear If we do make it it will be for 1 or 2 days
Get a life, Get a Moke...
JanZ
JanZ
- grantourer
- MMC Member
- Posts: 1128
- Joined: Fri Dec 31, 2010 15:55
- Location: Kenilworth. UK
Re: Seat runners for English Moke seat
Hi Jan. Nice looking Moke, all you need is some Weathermasters. Have you thought about using runners from the after market bucket seat suppliers?
Regards, Graham & Judith
1981 Aussie Moke
1989 Portuguese Moke
1979 Clubman Estate
1981 Aussie Moke
1989 Portuguese Moke
1979 Clubman Estate
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Seat runners for English Moke seat
That's what I was going to suggest. Try looking at Demon Tweeks website (that might be Tweaks)
Come on summer
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Thanks Graham - yes I'm quite smitten and probably do not deserve her this early in my Moking carreer I have registered interest with the possible manufacturers of Weathermasters. Their reply sounded as though they were going to be quite expensive if and when available. How are the Aquajets?grantourer wrote:Hi Jan. Nice looking Moke, all you need is some Weathermasters. Have you thought about using runners from the after market bucket seat suppliers?
I did have a look at those runner options, but they all appear to be for Mini. There is an angled bracket at the front. Not having looked closely yet at how Moke seats are fitted - the 64 looks just bolted to a flat surface - what mods would need to be made?Nigel(no top)Sykes wrote:That's what I was going to suggest. Try looking at Demon Tweeks website (that might be Tweaks)
Get a life, Get a Moke...
JanZ
JanZ
- grantourer
- MMC Member
- Posts: 1128
- Joined: Fri Dec 31, 2010 15:55
- Location: Kenilworth. UK
Re: Seat runners for English Moke seat
Hi Jan. The aquajets are excellent, and worth the money. I suppose tyre choice is also down to the use you put a Moke too. I believe in using them for the rough and the smooth. However their is abody that feels the cost of them means no rough stuff. My comment to that is look at the number of Series 1 land Rovers used for trailing and off road fun.
Regards, Graham & Judith
1981 Aussie Moke
1989 Portuguese Moke
1979 Clubman Estate
1981 Aussie Moke
1989 Portuguese Moke
1979 Clubman Estate
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Bought some seat runners for bucket / boat / go-kart seats from KDR Seating - single side locking http://www.ebay.co.uk/itm/BUCKET-SEAT-R ... 3a6745b423 fitted them today - only needed to chase one hole in each of the lower runners slightly to fit the cross member and seat perfectly. No mods needed to precious Moke steel . Managed to move the seat some 5" back. Perfect seating position, but probably helped by the fact that my driver seat was already lowered by 1.5" by Runamoke. The runners have a profile of 19mm high, so I'm still about 18mm lower than the standard seat. Even with Power Steering (the bakelite 16" wheel ) it's still a breeze, and I can get my foot on the high beam switch too - Bonus! . Went for a posing spin today, lots of hoots and thumbs upgrantourer wrote:Have you thought about using runners from the after market bucket seat suppliers?
Will post picture later
Get a life, Get a Moke...
JanZ
JanZ
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Seat runners for English Moke seat
i used to use my Aussie for rough and show. Now I've got 2 I can use one for show and one for go
Come on summer
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seat runners for English Moke seat
Who's a poet and didn't know it?
Get a life, Get a Moke...
JanZ
JanZ
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
-
- MMC Member
- Posts: 5232
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby