Seatbelt introductory date
-
- MMC Member
- Posts: 5227
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Seatbelt introductory date
Perhaps it depended on what market the body was being built for ?
Come on summer
- Wally2
- MMC Member
- Posts: 1693
- Joined: Sun Jul 29, 2012 20:02
- Location: Belper, Derbyshire
Re: Seatbelt introductory date
Hi Nigel,
Have a look at ''Requirement for Seat Belts in English Mokes'' below, Bodge gives a good account of belts and dates and things!
Chris
Have a look at ''Requirement for Seat Belts in English Mokes'' below, Bodge gives a good account of belts and dates and things!
Chris
Chris
WEEMOKE
JUX180D
WEEMOKE
JUX180D
- clm
- Posts: 278
- Joined: Mon Dec 26, 2011 11:17
Re: Seatbelt introductory date
Here is a picture showing in the rear fender, the only thing it had was the reinforcement across the bend in the rear wing, no seat belt mounts whatsoever.janz wrote:Are there reinforcement plates in the rear inner wings near the rear shock mounts? These were introduced in beginning of 1965 I believe. In the Body Parts Manual, they are parts 48, 49 and 50 (that is the rear wing reinforcement plate).
Chris
Edit, as a note, this is my body number (what's left of the original body.. >.<)
1965 Austin Moke - Rust was not free, I paid dearly for it
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
-
- MMC Member
- Posts: 5227
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Seatbelt introductory date
Yup, those rear wings are the same construction as mine
Come on summer
- Wally2
- MMC Member
- Posts: 1693
- Joined: Sun Jul 29, 2012 20:02
- Location: Belper, Derbyshire
Re: Seatbelt introductory date
Hi Chris,
Thats just before mine AB000566L !!
Chris
Thats just before mine AB000566L !!
Chris
Chris
WEEMOKE
JUX180D
WEEMOKE
JUX180D
- clm
- Posts: 278
- Joined: Mon Dec 26, 2011 11:17
Re: Seatbelt introductory date
Indeed, reading back in your post is seems yours had just been built when mine was getting on the boat to Philidelphia Funnily enough going by US holidays mine was built on Veterans Day 1965 (nov 11) and dispatched to Phili on Thanksgiving day 1965 (nov 25) lol
Chris
Chris
1965 Austin Moke - Rust was not free, I paid dearly for it
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
- Wally2
- MMC Member
- Posts: 1693
- Joined: Sun Jul 29, 2012 20:02
- Location: Belper, Derbyshire
Re: Seatbelt introductory date
hi Chris,
Our Mokes must be close relatives then! Mine was built 22th November 1965 and despatched to Philly on 27th January 1966.
I have details of some owners in San Diego and bills from Britannia Motors Inc. 2210 First Ave. San Diego but nothing between 1966 and 1979. I have an application for original registration from March 1987 on which it says the vehicle was purchased for $50!!!
Chris
Our Mokes must be close relatives then! Mine was built 22th November 1965 and despatched to Philly on 27th January 1966.
I have details of some owners in San Diego and bills from Britannia Motors Inc. 2210 First Ave. San Diego but nothing between 1966 and 1979. I have an application for original registration from March 1987 on which it says the vehicle was purchased for $50!!!
Chris
Chris
WEEMOKE
JUX180D
WEEMOKE
JUX180D
- Doug G
- MMC Member
- Posts: 5096
- Joined: Sun Sep 17, 2006 14:44
- Location: Caribbean
Re: Aussie Winscreen.
janz wrote:My MOT man is an ex Moke man
Thought that it was 'once a Mini Moke man always a Mini Moke man' ?
Having a moking good time!
- Robin Jones
- Posts: 655
- Joined: Wed Aug 08, 2007 20:02
- Location: Maple Heights/North Royalton, Ohio, USA
Re: Seatbelt introductory date
Chris,
I see you have the "mystery hole" just ahead of the shock mounting discussed here:
http://mokeclub.org/phpBB3/viewtopic.php?f=10&t=3969
Concensus of opinion was that it was used as a shoulder harness mount. Now, I'm not so sure.
Amazed at the rapid progress on "Rusty" your Moke. You're like letting loose a mad dog in a meat market.
I see you have the "mystery hole" just ahead of the shock mounting discussed here:
http://mokeclub.org/phpBB3/viewtopic.php?f=10&t=3969
Concensus of opinion was that it was used as a shoulder harness mount. Now, I'm not so sure.
Amazed at the rapid progress on "Rusty" your Moke. You're like letting loose a mad dog in a meat market.
This is Matt Jones Son of Robin.
- clm
- Posts: 278
- Joined: Mon Dec 26, 2011 11:17
Re: Seatbelt introductory date
Oh I know what those holes were for on mine, in fact they were still in use when I got the car. Someone drilled large holes and used large fender washers to mount rear seat belts... granted they put them in the middle of large flat panels so there was no strength... You can see the front seat belts mounts right under the front seats.
Chris
Chris
1965 Austin Moke - Rust was not free, I paid dearly for it
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
- Robin Jones
- Posts: 655
- Joined: Wed Aug 08, 2007 20:02
- Location: Maple Heights/North Royalton, Ohio, USA
Re: Seatbelt introductory date
On that view, the hole is lower than mine... I think I was confusicated by the upside down view....
By the hole & captive nut being missing on yours, I suppose that shoots down any theory of it being there for tooling purposes.
By the hole & captive nut being missing on yours, I suppose that shoots down any theory of it being there for tooling purposes.
This is Matt Jones Son of Robin.
- Gijzzy
- Posts: 158
- Joined: Sun Sep 02, 2007 18:17
- Location: The Netherlands
Re: Seatbelt introductory date
Wally2 wrote:Hi Chris,
Thats just before mine AB000566L !!
Chris
Mine has got .....234LWally2 wrote:Our Mokes must be close relatives then! Mine was built 22th November 1965 and despatched to Philly on 27th January 1966.
Build date: 20 October '65
Despatch: 6 January '66 (home market)
And has got the safty belts brackets in the back!
- clm
- Posts: 278
- Joined: Mon Dec 26, 2011 11:17
Re: Seatbelt introductory date
It's odd they would go through the trouble of designing the belt mounts and then not installing it in some shells. Seeing as when the saloon shells got seatbelt mounts, they all got seatbelt mounts whether they were used or not. Perhaps the A/B/0 numbers were spotted to shells when they were already built and as the regulation was for belts in the UK at the time they had a back stock of illegal seatbeltless shells they saved for export market orders?
Interesting
Interesting
1965 Austin Moke - Rust was not free, I paid dearly for it
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
- janz
- MMC Member
- Posts: 1148
- Joined: Sat Jun 11, 2011 9:11
- Location: Pyrénées Atlantiques, Aquitaine,France
Re: Seatbelt introductory date
I think all A/B shells were built with seatbelt mount reinforcement plates welded in... it's only AMB shells (pre - BMC buyout of pressed Steel) that seem to have no mounting points in the back
Get a life, Get a Moke...
JanZ
JanZ
- clm
- Posts: 278
- Joined: Mon Dec 26, 2011 11:17
Re: Seatbelt introductory date
Janz... Look up at the rusty pics... A/B shell with no seat belt mounts. It is a November 11th 1965 build for export to Philidelphia or so the heritage cert says.
It seems strange.. seeing as the seat belt requirements came in earlier then this was built there, perhaps there was a back stock of unusable shells? They got an order from a market where they were legal and then they used those? Perhaps a list of A/B numbers and if they had the mounts or not would show a pattern?
Chris
It seems strange.. seeing as the seat belt requirements came in earlier then this was built there, perhaps there was a back stock of unusable shells? They got an order from a market where they were legal and then they used those? Perhaps a list of A/B numbers and if they had the mounts or not would show a pattern?
Chris
1965 Austin Moke - Rust was not free, I paid dearly for it
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor
1961 Morris Traveller - Bent but repairable
1960 Morris saloon.. err wagon.. err Pickup, yeah that's it! - My first car
1980 Mini 95 Van shell - pickup load floor donor