I am about to buy :
Piston Ring Set - 998/1098cc 4 ring (pre A+) Std £61.14
Head Gasket Set (848cc, 998cc, 1098cc) pre A+ £8.34
Bottom End Engine Gasket Set (848cc, 998cc, 1098cc) 1965-79£10.74
Camshaft Bearing Set (850cc,997cc, 998cc, 1098cc) £13.14
Big End Bearings (Std) 848cc, 998cc, 1098cc & Cooper S £17.94
Main Bearing Set (Standard) Pre 1985 (848, 997, 998, 1098cc)£23.94
Bull Motif Mini Spares
Isbourne Way
Isbourne Park
Winchcombe
Gloucestershire
GL54 5NS
United Kingdom
Have you used this company?
They seem to be substantially less expensive that other suppliers.
Feed back requested.
Have you used this company? Engine being re built
- Doug G
- MMC Member
- Posts: 5096
- Joined: Sun Sep 17, 2006 14:44
- Location: Caribbean
Have you used this company? Engine being re built
Having a moking good time!
-
- MMC Member
- Posts: 5267
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Have you used this company? Engine being re built
The stuff I’ve had from them is unremarkable, no better no worse than others. It’s usually bought through their eBay ads. What does concern me is that unless you’ve already dismantled and checked the engine how do you know what size bearings etc to order?
Come on summer
- Doug G
- MMC Member
- Posts: 5096
- Joined: Sun Sep 17, 2006 14:44
- Location: Caribbean
Re: Have you used this company? Engine being re built
It is a 1973 engine.
They are currently dismantling it to check numbers.
They are currently dismantling it to check numbers.
Having a moking good time!
- Tim
- Posts: 2313
- Joined: Tue Oct 24, 2006 0:41
- Location: Hobart, Tasmania, Australia
Re: Have you used this company? Engine being re built
Yeah but if the journals are badly worn, the crankshaft will need to be ground down and polished, so you'll need undersized bearings. Likewise if the cylinder bores are worn they will need to be re-bored to a larger size, so you'll need oversize pistons and matching rings. If it all turns out to be fine then standard sizes will fit, but don't order them until you know how bad it is.
I've used Bull Motif before. They seemed fine.
Tim
I've used Bull Motif before. They seemed fine.
Tim
Any sarcastic, ignorant, libellous, unfounded or stupid opinions expressed in or through this message are the opinions of the author and do not reflect the opinions or views of any member of The Mini Moke Club or the opinions or views of any other individual.
-
- MMC Member
- Posts: 5267
- Joined: Tue Mar 07, 2006 21:04
- Location: Everywhere and nowhere baby
Re: Have you used this company? Engine being re built
As Tim says. I realise you want to get the parts in stock ready to go due to the long lead times you have but really it’s pointless until you know what’s inside the engine.
I also guess that you’re thinking “If they take it apart and have to then leave the collection of parts laying around how many will still be there when the parts arrive?”
I also guess that you’re thinking “If they take it apart and have to then leave the collection of parts laying around how many will still be there when the parts arrive?”
Come on summer